UBCD3600XLT | Uniden-Bearcat
Digital TrunkTracker receiver for VHF and UHF frequency bands with advanced scanning and search features. MicroSD card provided for storing Favorites Lists, profiles, settings, audio recording sessions. Ideated in USA/Japan, year of introduction 2017.
Reference market : ham-radio
|Frequency coverage ||
25.0000 ~ 512.0000 MHz
806.0000 ~ 960.0000 MHz
1240.0000 ~ 1300.0000 MHz
|Modulation mode ||AM / FM / FM-W / LTR / APCO 25 / P25 / EDACS / DMR / Motorola|
|Tuning step ||5 / 6.25 / 7.5 / 8.333 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz|
0.4 uV (25 MHz, 12dB SINAD)
0.4 uV (118/136 MHz, 12dB SINAD)
0.3 uV (225 MHz, 12dB SINAD)
0.4 uV (273/315/325 MHz, 12dB SINAD)
0.3 uV (41/54/72 MHz, 12dB SINAD)
0.4 uV (138 MHz, 12dB SINAD)
0.3 uV (173/216 MHz, 12dB SINAD)
0.3 uV (406/512 MHz, 12dB SINAD)
0.3 uV (758/806/857/955 MHz, 12dB SINAD)
0.4 uV (1300 MHz, 12dB SINAD)
0.7 uV (54 MHz, 12dB SINAD)
0.6 uV (108/197 MHz, 12dB SINAD)
|Sensitivity (Close Call function)||AM||
-69 dBm (127 MHz)
-71 dBm (273 MHz)
-58 dBm (41 MHz)
-65 dBm (72 MHz)
-71 dBm (162 MHz)
-66 dBm (406 MHz)
-64 dBm (857 MHz)
-58 dBm (1300 MHz)
|Signal to noise ratio (audio)||AM||
49 dB (25 MHz)
50 dB (127/273/325 MHz)
43 dB (41 MHz)
47 dB (72 MHz)
41 dB (162 MHz)
42 dB (173 MHz)
41 dB (406 MHz)
42 dB (758/857 MHz)
41 dB (1300 MHz)
53 dB (54 MHz)
60 dB (107 MHz)
52 dB (197 MHz)
|RF attenuator||20 dB|
High number of locations with dynamic architecture
256 Favorites lists on database
192 x 160 dot matrix LCD
5-segments signal meter bar
3.6V batteries (3 AA Ni-MH)
4.5V batteries (3 AA alkaline)
5.0 VDC external USB
360 mW typ with an 24Ω load
800 mW max with an 24Ω load
|Audio output||Jack 3.5 mm|
|Mechanical and environmental data :|
|Operating temperature||from -10°C to +60°C|
|Dimensions||71 (W) x 161 (H) x 37 (D) mm, without antenna|
|Weight||349g without antenna and batteries|
 Steps/modes user-definable or as band-plan by default
The UBCD-3600XLT scanner allows the reception of digital modes in standards widely used in Europe and North America such as DMR, LTR, APCO 25, P25, EDACS, Motorola. Its distinctive feature concerns the structure of the internal memory. All of the information contained in the scanner is stored on a micro SD card supplied with the receiver. This includes Favorites Lists and the radio settings. Because the memory is based on a database (ed. Radio Reference) we now have a different order of organization not like banks and channels, but more like dynamic memory architecture (DMA). You can now use Favorites Lists that follow the database structure of Systems that contain Departments that hold the Channels (conventional frequencies or IDs) and then there are Sites to hold just the trunking frequencies. Favorites Lists will allow you to store channels you find when you are scanning from the full database, the easiest way. They can contain channels from trunking systems as conventional systems. You can also manually add systems, departments and channels into Favorites Lists from the database as well as program new systems, departments, sites, and channels with the Sentinel software. You can save up to 256 different lists in the scanner and associate them with any or all of your profiles. You can monitor one or more lists at a time, you can also export lists to a file to share them with other users or UBCD-3600-XLT receivers.
Main features :
- Trunk Tracker V operation
Scans APCO 25 Phase 1 and Phase 2, DMR, Motorola, EDACS, EDACS ProVoice, LTR trunked systems. As well as conventional analog and P25 digital channels.
- Favorites scan
Allows you to organize your Systems into Favorites Lists. The scanner will scan multiple Favorites Lists and Full Database at the same time.
- 4 GB micro SD card
Provided, up to 32 GB supported. For storing Favorites Lists, profiles, settings, audio recording.
- Location based scanning
With a GPS receiver, for precise system selection and continuing reselection when you travel. The scanner can automatically avoid and unavoid Systems and Departments based on your current location.
- Range control
Lets you set how far out from your current location the scanner will search for channels in Favorites Lists.
Lets you program the scanner to share trunked system ID across multiple sites without duplicating the informations.
- Control Channel only scanning
With Motorola trunking frequencies you do not have to program voice channel frequencies.
- Audio recording
Capture transmissions on SD card.
- Instant replay
Plays back up to 240 seconds of the most recent transmissions.
- Custom alerts
You can program the scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors (white, blue, red, yellow, magenta, green, cyan), and 2 flash patterns.
- Trunking discovery
Monitors radio traffic on a trunked system to find unknown ID and automatically records audio from and logs new channels for later review.
- Conventional discovery
Searches a range of frequencies to find unknown radio traffic and automatically records audio from and logs new channels for later review.
- Priority scan
Keep track of activity on your most important channels while monitoring other channels for transmissions.
- Priority ID scan
Set priority to talkgroup IDs.
- Quick search
Lets you enter a frequency and start searching.
- Search speed
Up to 80 step/second in Search mode except for 5 kHz steps. Up to 250 step/second in Turbo Search for 5 kHz steps.
- Multi-level display and keypad light
Three light levels.
- Skip temporary or permanent
For avoid Systems, Sites, Departments, Channels.
- Fast start-up configuration
You can program each of your Favorites Lists with a Startup Key (0...9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan.
Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted.
- PC programming
Use the Sentinel software to manage your scanners Profiles, Favorites Lists, firmware updates.
elps automatically balance the volume level between analog and digital radio systems.
- IF exchange
Changes the intermediate frequency used for a selected channel to avoid image and other mixer-product interference.
- Individual channel audio volume
Allows you to adjust the volume offset for each channel.
- Adjustable scan-search times
Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search.
- User labels
Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location and Custom Search, using up to 64 characters.
- Custom searches
Lets you program up to 10 search ranges.
- Built-in battery charger
Allows you to charge the Ni-MH batteries in the scanner.
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.