RF-6G

AOR
RF-6G

Specifications

Prices

500 KHz to 6 GHz super wide-band coverage tuner. RF front-end for professional signal analysis with 20 MHz wide IF bandwidth. Ideated in Japan, year of introduction 2013.

Reference market : professional

RF-6G specifications

General

Frequency coverage
0.5000 ~ 6000.0000 MHz
Tuning step
1 Hz

Receiver

IF output frequency
45.05 MHz
IF output bandwidth
20 MHz [1]
Gain RF to IF
30 dB
Gain flatness
± 2 dB
RF preamplifier
~12 dB (300 MHz)
RF attenuator
0 / 10 / 20 dB (< 1000 MHz)
NF (Noise Figure)
11 dB typ (< 1000 MHz)
IP3 (3rd order intercept point)
+3 dBm min (< 3000 MHz)
RF maximum input level
+15 dBm
Frequency stability
± 0.1ppm after 5' warm-up
Synthesizer settling time
< 3 ms

Features

Antenna
2 x SMA 50Ω
IF output
SMA 50Ω
Power supply
10.7 ~ 16 VDC external
Power consumption
1200 mA typ
Connections
DB-9 (power supply and PH5 control interface) IDC-10P (SPI control interface)

Mechanical and environmental data

Operating temperature
from -10°C to +50°C
Dimensions
100 (W) x 40 (H) x 250 (D) mm
Weight
720g

Full 20 MHz bandwidth available for receive center frequency of at least 10.5 MHz.

Aeronautical Radio List UK - N. IRELAND 2024

Download Now the eBook, with All the Frequencies 108-137 MHz

Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME

RF-6G description :

The RF-6G is a wide-band RF front-end with fast switching synthesizer and low gain flatness over 500 KHz to 6 GHz coverage. Moreover excellent phase noise performance and high-linearity IF output with 20 MHz bandwidth. Two interfaces, the high-speed SPI for 10 Mbps and the asynchronous PH5 control at 115 kbps. On all bands RF6G provides very good tuning characteristics needed for professional signal analysis. Typical applications for the tuner is the integration into high-end monitoring systems, for interference detection and investigation, in field-strength measurements, radio propagation research, close-range detection of illegal eavesdropping devices. This AOR provides high accuracy on 45.05 MHz IF output for external peripherals, factory calibration ensures that the output is correlated to the antenna RF input within only few dB and this on the entire receive range:

The RF 6G has two RF antenna connectors, selectable, and a low noise down converter. A direct digital synthesizer is employed for the 1° local oscillator to ensure fast frequency switching of less than 3 mS. An input filters bank pre-select the RF spectrum:

Filter / Bandwidth
LPF 1	1.6 MHz
LPF/HPF 2	1.6~35 MHz
BPF 3	20~60 MHz
BPF 4	60~105 MHz
BPF 5	105~140 MHz
BPF 6	140~220 MHz
BPF 7	200~350 MHz
BPF 8	350~600 MHz
BPF 9	600~1000 MHz
BPF 10	1000~1500 MHz
BPF 11	1500~2000 MHz
BPF 12	2000~2500 MHz
BPF 13	2500~3000 MHz
BPF 14	3000~4000 MHz
BPF 15	4000~5000 MHz
BPF 16	5000~6000 MHz

RF-6G front panel connections :

RF-6G price

We have collected for your convenience the Aor RF6G sale price (UK Pounds) and its trend over time. Useful to guarantee a cheaper purchase of this device and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
GBP 4389.00 (5899USD)	2018-oct	Brand-new

RF-6G review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.