FT-DX9000MP

Yaesu
FT-DX9000MP

Specifications

Prices

Elite Class Yaesu HF/50 MHz transceiver. 400 Watts of power output, full duplex operation, two independent receivers, external power supply with dual speakers, and much more! 3rd-order Intercept Point in excess of +40 dBm, Blocking Dynamic Range 150 dB. Four analog meters, four RX/TX antenna connectors, 160 to 6 meters variable preselector filter. Ideated in Japan, year of introduction 2004.

Reference market : amateur-radio

FT-DX9000MP specifications

General

Frequency coverage
Receive	0.0300 ~ 60.0000 MHz [1]
Transmit	1.8000 ~ 2.0000 MHz 3.5000 ~ 4.0000 MHz 5.1675 MHz [2] 5.3 MHz band [3] 7.0000 ~ 7.3000 MHz 10.1000 ~ 10.1500 MHz 14.0000 ~ 14.3500 MHz 18.0680 ~ 18.1680 MHz 21.0000 ~ 21.4500 MHz 24.8900 ~ 24.9900 MHz 28.0000 ~ 29.7000 MHz 50.0000 ~ 54.0000 MHz
Mode
CW / FSK (RTTY) / LSB / USB / AM / FM
Tuning step
1 / 5 / 10 / 100 Hz / 1 / 2.5 / 5 / 6.25 / 9 / 10 / 12.5 / 20 / 25 / 100 KHz / 1 MHz

Receiver

Sensitivity
SSB [4]	0.2 uV (1.8~30 MHz amateur bands, 10dB S+N/N). 0.125 uV (50 MHz amateur band, 10dB S+N/N). 2 uV (0.1~50 MHz, 10dB S+N/N).
AM [5]	3.2 uV (0.1~1.8 MHz, 10dB S+N/N). 2 uV (1.8~30 MHz, 10dB S+N/N). 1 uV (50 MHz amateur band, 10dB S+N/N).
FM [6]	0.5 uV (28 MHz amateur band, 12dB SINAD). 0.35 uV (50 MHz amateur band, 12dB SINAD).
Selectivity
CW/RTTY/PKT [7]	>0.50 kHz (-6dB) <0.75 kHz (-60dB)
SSB [7]	>2.4 kHz (-6dB) <3.6 kHz (-60dB)
AM [7]	>9 kHz (-6dB) <18 kHz (-60dB)
FM [7]	>15 kHz (-6dB) <25 kHz (-60dB)
RF preamplifier
Yes
RF attenuator
3 / 6 / 12 / 18 dB
DR (Dynamic Range)
110 dB (100 KHz spaced signals, 14 MHz, IPO On)
Blocking
132 dB (10 KHz spaced signal, 14 MHz, IPO On). 150 dB (100 KHz spaced signal, 14 MHz, IPO On).
IP3 (3rd order intercept point)
+40 dBm (100 KHz spaced signals, 14 MHz, IPO On)
Image rejection
>70 dB (1.8~30 MHz amateur bands)
IF-shift range
±1 KHz (20Hz steps)
Notch filter
Manual	~70 dB (wide / narrow)
Automatic	Yes
NB (Noise Blanker)
Level adjustable, wide / narrow mode
DNR (Digital Noise Reduction)
Level adjustable
RIT (Receiver Incremental Tuning)
±9.999 KHz
AGC (Automatic Gain Control)
Off, sloped, slow, fast (time settings adjustable)
Frequency stability
± 0.03ppm with temperature from -10°C to +60°C after 5' warm-up
IF (Intermediate Frequency)
1°	40.455 MHz (VFO-A) 40.450 MHz (VFO-B)
2°	455 kHz (VFO-A) 450 kHz (VFO-B)
3°	30 kHz (all modes except for FM). 24 kHz (FM)
IF roofing filter
3 / 6 / 15 kHz
CW features
Zero-beating display. Adjacent channel monitor (ACM). Audio peak filter (APF). Semi break-in / full break-in. U/LSB mode reversal. Pitch control (300~1050Hz, 50Hz steps).
FSK features
High / low tone. Polarity reversal.

Transmitter

Output power
CW / FSK / SSB / FM	10 ~ 400 W
SSB	10 ~ 100 W (class A mode)
AM	10 ~ 100 W
Spurious emission
Harmonics	<-60 dB (1.8~30 MHz amateur bands). <-70 dB (50 MHz amateur band).
Carrier suppression (SSB)
<-70 dB
Unwanted sideband suppression (SSB)
<-80 dB
Intermodulation products (SSB)
-31 dBc (400W PEP). -50 dBc (100W PEP, class A mode).
Maximum deviation (FM)
± 2.5 kHz (narrow) ± 5.0 kHz (wide)
Audio response
400~2600 Hz (-6 dB, SSB)
Microphone
600Ω (200Ω to 10kΩ)
XIT (Transmitter Incremental Tuning)
±9.99 kHz
CW features
4~60 WPM keyer Straight / Iambic key Iambic ACS selection 30-3000ms CW-VOX delay
Antenna tuner
Impedance range	16.7 ~ 150Ω (1.8~30 MHz amateur bands). 25 ~ 100Ω (50 MHz amateur band)
Channel memory	100 (one for band and 89 for most-recent tuning points)

Features

Memory
99 regular memories, up to 6 groups. 9 pairs for programmed scan limits. 5 quick memories (QMB). 3 band-stack for each band in the VFO registers.
Display
1 Hz frequency resolution
Selective calling
CTCSS
Antenna
4 x SO239 50Ω 1 x SO239 50Ω (receive only)
Power supply
90 ~ 264 VAC [8]
Power consumption
100 VA, RX (no signal) 120 VA, RX (signal present) 1000 VA, TX (400W @ 117VAC)
Audio power
2.5 W on 4Ω 7 W on 8Ω [8]
Audio output
Jack 6.35 mm headphone
Connections
DB-9 RS232C (CAT, PC) USB (keyboard) RCA (PTT) RCA (Patch - audio input) RCA (Transverter output) RCA (ALC) RCA (TX active) RCA (+13.8VDC, 200mA) Jack 3.5 mm (VFO-A/B line output) Jack 3.5 mm (audio output - future use) Jack 3.5 mm (audio input) Jack 3.5 mm (Control keypad) 2 x Jack 3.5 mm (VFO-A/B external speaker) Jack 6.35 mm (key, front panel) Jack 6.35 mm (key, rear panel) 4-pin Jack (RTTY TNC) 5-pin Jack (Packet TNC) 6-pin Jack (PS2 keyboard) 7-pin Jack (COM, GPS data) 7-pin Jack (band data 2, power amplifier) 8-pin Jack (band data 1, power amplifier) 8-pin Jack (microphone) 15-pin Jack (display) 6-pin miniDIN (antenna rotator) XLR (microphone, front panel) 2 x BNC (RX antenna output)

Mechanical and environmental data

Operating temperature
from -10°C to +60°C
Dimensions
Transceiver	518 (W) x 165 (H) x 438.5 (D) mm
Power supply	246 (W) x 165 (H) x 438 (D) mm
Weight
Transceiver	29 kg
Power supply	10.5 kg

1.8~54 MHz specified performance guaranteed, amateur bands only.
Alaska emergency channel, USA version only.
5 channels for UK version, 7 channels for USA version.
2.4 kHz bandwidth, IPO Off.
6.0 kHz bandwidth, IPO Off.
15 kHz bandwidth, IPO Off.
Width on "center", VRF Off, u-Tune Off.
FPS-9000H power supply unit with dual speakers and audio filters.

Aeronautical Radio List UK - N. IRELAND 2024

Download Now the eBook, with All the Frequencies 108-137 MHz

Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME

FT-DX9000 series :

The FT-DX-9000MP transceiver version provide 400 Watts of power output and comes with: external 50V / 24A switching power supply and speaker, two pairs of analog meters, LCD window, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability. TFT and u-Tune are optionals.

The FT-DX-9000D transceiver version provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, large high-resolution and multi-function TFT display, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability, three u-Tuning modules for main receiver 160-20 meter bands.

The FT-DX-9000 Contest transceiver, custom-configurable version, provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, two pairs of analog meters, LCD window, variable RF filter (VRF), three Key jacks and two headphone jacks. DMU, TFT, RXU (dual-receive) and u-Tune are optionals.

FT-DX9000MP power module :

Yaesu FT-DX9000MP, 4 x 2SD2931 MOSFET produce 400W of output power

FT-DX9000MP and power supply/speaker :

Yaesu FT-DX9000MP, external 50V/24A switching power supply and speaker

Yaesu FT-DX9000MP, external 50V/24A switching power supply with dual speakers and audio filters

FT-DX9000MP price

We have collected for your convenience the Yaesu FTDX9000MP sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
EUR 8140.00 (6999GBP)	2021-jun	Second Hand Excellent condition. Boxed and complete with all the original parts and manuals. Includes additional features of PEP9000 performance enhancement program
EUR 5150.00 (6850USD)	2013-dec	Second Hand Perfect. With accessories and extras in excellent condition. The radio comes with the manual, FH-2 remote keypad, memory card and the 50V power supply/speaker. Original Boxes

FT-DX9000MP review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.