RadioMasterList.com

The World Best Receivers and Transceivers Directory

FTM-200D

Yaesu
FTM-200D

Specifications

Prices

The FTM-200D is a FM / C4FM Digital multi-functional transceiver delivers reliable and stable 50 Watts transmit performance. 5-cm full-color Display provides high visibility and highlights the frequency of the operating band with selectable color, White, Blue or Red. The front panel is detachable and can be mounted at the most desirable operating position. Features include: Wide-range 108 to 1000 MHz receive coverage, 1104 Memory channels programmable with 16-character alpha-numeric tags, PMG (Primary Memory Group) function, High speed Band Scope up to 61 channels centered on the current VFO frequency or up to 21 channels in Memory Mode, High-precision 66 channel GPS Receiver, 1200/9600bps APRS Communication, VOX function, Recording function, Snapshot feature, microSD Card slot. The Custom Function List (CFL) quickly recalls a list of frequently used functions by simply pressing a key. The heavy-duty heat sink is equipped with Air-Convection Conductor, while the speaker delivers 3 Watts of clear audio. Ideated in Japan, year of introduction 2022.

Reference market : amateur-radio

FTM-200D specifications

General

Frequency coverage
Receive	108.0000 ~ 999.9950 MHz [1]
Transmit	144.0000 ~ 148.0000 MHz [2] 144.0000 ~ 146.0000 MHz [3] 430.0000 ~ 450.0000 MHz [2] 430.0000 ~ 440.0000 MHz [3]
Mode
FSK [4] / AM [5] / FM / C4FM
Tuning step
5 / 6.25 / 8.33 [6] / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz

Receiver

Sensitivity
AM	0.8 uV (108~137 MHz, 10dB S/N) 0.8 uV (300~336 MHz, 10dB S/N)
FM	0.2 uV (137~140 MHz, 12dB SINAD) 0.2 uV (140~150 MHz, 12dB SINAD) 0.25 uV (150~174 MHz, 12dB SINAD) 0.3 uV (174~222 MHz, 12dB SINAD) 0.25 uV (222~300 MHz, 12dB SINAD) 0.25 uV (336~420 MHz, 12dB SINAD) 0.2 uV (420~470 MHz, 12dB SINAD) 0.2 uV (470~540 MHz, 12dB SINAD) 0.8 uV (540~800 MHz, 12dB SINAD) 0.4 uV (800~900 MHz, 12dB SINAD) 0.8 uV (900~1000 MHz, 12dB SINAD)
C4FM	0.19 uV (140~150 MHz, BER 1%) 0.19 uV (420~470 MHz, BER 1%)
Selectivity
AM / FM	12 KHz (-6dB) 30 KHz (-60dB)
Frequency stability
±2.5 ppm with temperature from -20°C to +60°C
IF (Intermediate Frequency)
1°	58.050 MHz
2°	450 KHz

Transmitter

Output power
FM	50 / 25 / 5 W
C4FM	50 / 25 / 5 W
Spurious emission
<-60 dBc
Maximum deviation (FM)
±5.0 KHz
Microphone
2kΩ 10kΩ (data input)

Features

Memory
999 regular memories 50 pairs for scan limits 5 home channels 10? pre-programmed weather channels [2]
Display
51mm (2-inch) color QVGA TFT 1 kHz frequency resolution 50-segments signal meter bar
Selective calling
CTCSS sub-tones DCS codes DTMF tones 1750 Hz T-call [3]
Transmit/receive offset
±0.0 ~ 99.95 MHz
Antenna
SO239 50Ω
Power supply
13.8 VDC (nominal, negative ground)
Power consumption
500mA RX 11A TX (50W, 144 MHz) 11A TX (50W, 430 MHz)
Audio power
3 W on 8Ω
Audio output
Jack 3.5 mm (speaker)
Connections
mini-DIN (DATA) USB (DATA / Snapshot camera) USB (DATA / Firmware update) Jack (ext GPS)

Mechanical and environmental data

Operating temperature
from -20°C to +60°C
Dimensions
Controller	139 (W) x 53 (H) x 18 (D) mm without knobs
Radio unit	139 (W) x 42 (H) x 132 (D) mm without fan
Weight
1.1kg with Radio unit, Controller and Cable

FTM-200DR, USA version cellular blocked.
FTM-200DR version.
FTM-200DE version.
For APRS communication.
Receiver only.
For 108-137 MHz Air-band.

FTM-200D High-Resolution display :

Full-color 5.1cm (2 inch) display provides high visibility with high brightness and wide viewing angle. The high-resolution display highlights the frequency of the operational band. The color of the operating band can be selected from white, blue, or red.

Yaesu FTM-200D high-resolution display (Normal Screen or VFO Display) in three colors

Frequently used functions can be easily operated on the CFL (Custom Function List) display. With a single press of the "F/MENU" key you can check the list of priority functions and their setting status at a glance, and the directly execute the functions or change the settings on the same screen. To register a set item to the custom list press and hold the "F/MENU" key to display the setup menu, select the desidered function with the dial, then press and hold the same key to easily move it to the custom list. Up to 8 functions or setting from the setup menu can be registered to the CFL.

FTM-200D MAG and PMG functions :

The Memory Auto Grouping (MAG) function allows memory channels to be automatically categorized in each band, and then the channels can be quickly recalled by Band groups. By pressing the "BAND" key while operating on a memory channel the bands will switch in the order as follow. In ALL the Memory Auto Grouping function is turned OFF and all memory channels are recalled.

Yaesu FTM-200D memory auto grouping (MAG) and Primary Memory Group (PMG) functions

The Primary Memory Group (PMG) function of the Yaesu FT5D dual receiver has been simplified and adopted to the FTM-200D single receiver. Regardless of VFO or Memory Channel operation, the current display frequency can be instantly registered to the Primary Memory Group, up to 5 channels, by pressing and holding the "PMG" key. After registration simply press the same key to immediatelly switch to the PMG monitor screen from any mode. Auto mode or Manual mode operation can be selected, and you can switch the mode by pressing the dial when using the PMG display. In Auto mode scan automatically stops at the channel with the signal and outputs the received audio, and when there is no signal scan automatically searches for a signal in PMG channels again. When operating on the receiving channel press the PTT key or the dial to fix the frequency.

FTM-200D High Speed Band Scope :

The band scope function displays the receive status of the VFO mode, and the registered channels statuses are displayed when operating the Memory Channel mode. The FTM-200D ha only one receiver, the received audio of a specific channel will not be output when the band scope is activated. To monitor the received audio, rotate the dial and select the desidered channel bar. The band scope can be turned ON/OFF by pressing the "DISP" key on the front panel.

In VFO mode up to 61 channels centered on the current frequency are displayed. The band scope frequency step is the same as the VFO frequency step. In Memory Channel mode up to 21 channels of signal information can be displayed.

FTM-200D Digital Node function :

Yaesu FTM-200D simpler and highly-mobile, portable digital node function

Worldwide communications are enabled with a Digital node station connected to the Internet. With the Wires-X Portable Digital Node (PDN) function, the FTM-200D can connect to the Wires-X network through an Internet connected PC, from any location.

FTM-200D GPS and Smart Navigation functions :

The FTM-200D comes standard with a high-sensitivity 66 channel GPS receiver in the Controller Panel. In C4FM digital mode the position and direction of the contact stations can be displayed in real time. Various navigation, location, and GPS log functions are supported. In addition the controller has an terminal to provide connection of an external GPS device.

Yaesu FTM-200D GPS (left) and Smart Navigation (right) functions

The Digital V/D Mode transmits additional information such as position data, distance, and direction at the same time as the audio signal. This allows the location of the received station to be displayed on the compass screen in real time, while communicating. More, the Backtrack function allows viewing the direction and distance to a pre-registered point from your current position in real time. Navigation back to the departure point, or to a previously registered point, is made possible. Up to three locations can be pre-registered.

FTM-200D other features :

Wideband Reception

The transceiver provides continuous wide range receive coverage from 108 MHz to 999.995 MHz.

Loud 3 Watt Outstanding Quality Audio

A 3W audio speaker ensures clear and crisp sound. You can enjoy communications with outstanding quality audio even in outdoor and/or noisy environments.

FM friendly C4FM Digital communications using Automatic Mode Select (AMS) function.

DTMF, CTCSS, DCS and EPCS (pager) built-in.

APRS Data communication

An APRS received station information list is displayed. Message exchange, at 1200/9600 bps, as wel as SmartBeaconing are supported. Communicate the location information between your own station and other stations, and view the positional relationship on the compass display. Also, your APRS movement trajectory can be confirmed on the Internet websites.

Digital Group ID (DG-ID) and Group Monitor (GM) functions.

1104 Memory channels

The radio makes available a wide variety of memory resources including 999 basic memories, 5 home channels for favorite frequencies, and 50 sets for PMS (Programmable Memory Scan). The channel tags are programmable with 16 alphanumeric characters for easy recognition.

Split Memory function.

micro-SD card slot, up to 32 GB.

Recording function

The received audio, or the transmit audio, can be recorded. The recorded voice data is saved as an audio file list on the micro-SD card. You can replay audio and listen at any time. The optional Voice Guide Unit FVS-2 allows automatic recording of the last 30 seconds of received signals.

Snapshot feature

Transmit, with optional camera microphone MH-85A11U, and Receive image data.

NOAA Weather alert, when available in your area.

FTM-200D panels and connections :

Yaesu FTM-200D left and right side panel

Reference / Description
1	micro-SD card slot
2	Press to release the control panel from the transceiver
3	External GPS jack
4	DATA jack

Yaesu FTM-200D Control head, rear panel

Reference / Description
1	Plug the control cable into this jack to connect with the main body
2	Screw hole for bracket
3	Firmware update switch

Yaesu FTM-200D Main body, front panel

Reference / Description
1	Plug the control cable into this jack to connect with the control head
2	MIC jack
3	DATA jack
4	Firmware update switch

Yaesu FTM-200D Main body, rear panel

Reference / Description
1	Antenna terminal
2	Cooling fan
3	13.8V DC
4	DATA jack
5	External speaker

FTM-200D optional accessories :

Yaesu FTM-200D optional accessories

Supplied accessories: DTMF Microphone SSM-85D, Mounting bracket, Bracket for Controller, Control cable 3 meters, USB cable, and DC Power cable.

FTM-200D price

We have collected for your convenience the Yaesu FTM200 sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
USD 359.95	2023-mar	Brand-new Special Price
USD 399.95	2022-mar	Brand-new

FTM-200D review

narnar62

December-15 2023

Very good dual-band rig.

[End post]

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.