FT-DX9000D

Specifications    Prices

Elite Class Yaesu HF/50 MHz transceiver. Full duplex operation, 200 Watts of power output, two totally independent receivers, internal power supply, and much more! 3rd-order Intercept Point in excess of +40 dBm, Blocking Dynamic Range 150 dB. Large 6.5-inch multi-function TFT display, three large knobs for effortless operation, antenna switching optimized for contest use, 160 to 6 meters variable preselector filter. Ideated in Japan, year of introduction 2004.

Reference market : amateur-radio

FT-DX9000D specifications

General
Frequency coverage
Receive0.0300 ~ 60.0000 MHz [1]
Transmit1.8000 ~ 2.0000 MHz
3.5000 ~ 4.0000 MHz
5.1675 MHz [2]
5.3 MHz band [3]
7.0000 ~ 7.3000 MHz
10.1000 ~ 10.1500 MHz
14.0000 ~ 14.3500 MHz
18.0680 ~ 18.1680 MHz
21.0000 ~ 21.4500 MHz
24.8900 ~ 24.9900 MHz
28.0000 ~ 29.7000 MHz
50.0000 ~ 54.0000 MHz
Mode
CW / FSK (RTTY) / LSB / USB / AM / FM
Tuning step
1 / 5 / 10 / 100 Hz / 1 / 2.5 / 5 / 6.25 / 9 / 10 / 12.5 / 20 / 25 / 100 KHz / 1 MHz
Receiver
Sensitivity
SSB [4]0.2 uV (1.8~30 MHz amateur bands, 10dB S+N/N).
0.125 uV (50 MHz amateur band, 10dB S+N/N).
2 uV (0.1~50 MHz, 10dB S+N/N).
AM [5]3.2 uV (0.1~1.8 MHz, 10dB S+N/N).
2 uV (1.8~30 MHz, 10dB S+N/N).
1 uV (50 MHz amateur band, 10dB S+N/N).
FM [6]0.5 uV (28 MHz amateur band, 12dB SINAD).
0.35 uV (50 MHz amateur band, 12dB SINAD).
Selectivity
CW/RTTY/PKT [7]>0.50 kHz (-6dB)
<0.75 kHz (-60dB)
SSB [7]>2.4 kHz (-6dB)
<3.6 kHz (-60dB)
AM [7]>9 kHz (-6dB)
<18 kHz (-60dB)
FM [7]>15 kHz (-6dB)
<25 kHz (-60dB)
RF preamplifier
Yes
RF attenuator
3 / 6 / 12 / 18 dB
DR (Dynamic Range)
110 dB (100 KHz spaced signals, 14 MHz, IPO On)
Blocking
132 dB (10 KHz spaced signal, 14 MHz, IPO On).
150 dB (100 KHz spaced signal, 14 MHz, IPO On).
IP3 (3rd order intercept point)
+40 dBm (100 KHz spaced signals, 14 MHz, IPO On)
Image rejection
>70 dB (1.8~30 MHz amateur bands)
IF-shift range
±1 KHz (20Hz steps)
Notch filter
Manual~70 dB (wide / narrow)
AutomaticYes
NB (Noise Blanker)
Level adjustable, wide / narrow mode
DNR (Digital Noise Reduction)
Level adjustable
RIT (Receiver Incremental Tuning)
±9.999 KHz
AGC (Automatic Gain Control)
Off, sloped, slow, fast (time settings adjustable)
Frequency stability
± 0.03ppm with temperature from -10°C to +60°C after 5' warm-up
IF (Intermediate Frequency)
40.455 MHz (VFO-A)
40.450 MHz (VFO-B)
455 kHz (VFO-A)
450 kHz (VFO-B)
30 kHz (all modes except for FM).
24 kHz (FM)
IF roofing filter
3 / 6 / 15 kHz
CW features
Zero-beating display.
Adjacent channel monitor (ACM).
Audio peak filter (APF).
Semi break-in / full break-in.
U/LSB mode reversal.
Pitch control (300~1050Hz, 50Hz steps).
FSK features
High / low tone.
Polarity reversal.
Transmitter
Output power
CW / FSK / SSB / FM5 ~ 200 W
SSB5 ~ 75 W (class A mode)
AM5 ~ 75 W
Spurious emission
Harmonics<-60 dB (1.8~30 MHz amateur bands).
<-70 dB (50 MHz amateur band).
Carrier suppression (SSB)
<-70 dB
Unwanted sideband suppression (SSB)
<-80 dB
Intermodulation products (SSB)
-31 dBc (200W PEP).
-50 dBc (75W PEP, class A mode).
Maximum deviation (FM)
± 2.5 kHz (narrow)
± 5.0 kHz (wide)
Audio response
400~2600 Hz (-6 dB, SSB)
Microphone
600Ω (200Ω to 10kΩ)
XIT (Transmitter Incremental Tuning)
±9.99 kHz
CW features
4~60 WPM keyer
Straight / Iambic key
Iambic ACS selection
30-3000ms CW-VOX delay
Antenna tuner
Impedance range16.7 ~ 150Ω (1.8~30 MHz amateur bands).
25 ~ 100Ω (50 MHz amateur band)
Channel memory100 (one for band and 89 for most-recent tuning points)
Features
Memory
99 regular memories, up to 6 groups.
9 pairs for programmed scan limits.
5 quick memories (QMB).
3 band-stack for each band in the VFO registers.
Display
16.5cm (6.5-inch) TFT
1 Hz frequency resolution
Selective calling
CTCSS
Antenna
4 x SO239 50Ω
1 x SO239 50Ω (receive only)
Power supply
90 ~ 264 VAC
Power consumption
100 VA, RX (no signal)
120 VA, RX (signal present)
720 VA, TX (200W)
Audio power
2.5 W on 4Ω
Audio output
Jack 6.35 mm headphone
Connections
DB-9 RS232C (CAT, PC)
USB (keyboard)
RCA (PTT)
RCA (Patch - audio input)
RCA (Transverter output)
RCA (ALC)
RCA (TX active)
RCA (+13.8VDC, 200mA)
Jack 3.5 mm (VFO-A/B line output)
Jack 3.5 mm (audio output - future use)
Jack 3.5 mm (audio input)
Jack 3.5 mm (Control keypad)
2 x Jack 3.5 mm (VFO-A/B external speaker)
Jack 6.35 mm (key, front panel)
Jack 6.35 mm (key, rear panel)
4-pin Jack (RTTY TNC)
5-pin Jack (Packet TNC)
6-pin Jack (PS2 keyboard)
7-pin Jack (COM, GPS data)
7-pin Jack (band data 2, power amplifier)
8-pin Jack (band data 1, power amplifier)
8-pin Jack (microphone)
15-pin Jack (display)
6-pin miniDIN (antenna rotator)
XLR (microphone, front panel)
2 x BNC (RX antenna output)
Mechanical and environmental data
Operating temperature
from -10°C to +60°C
Dimensions
518 (W) x 165 (H) x 438.5 (D) mm
Weight
30 kg

  1. 1.8~54 MHz specified performance guaranteed, amateur bands only.
  2. Alaska emergency channel, USA version only.
  3. 5 channels for UK version, 7 channels for USA version.
  4. 2.4 kHz bandwidth, IPO Off.
  5. 6.0 kHz bandwidth, IPO Off.
  6. 15 kHz bandwidth, IPO Off.
  7. Width on "center", VRF Off, u-Tune Off.
FT-DX9000 series :

The FT-DX-9000D transceiver version provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, large high-resolution and multi-function TFT display, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability, three u-Tuning modules for main receiver 160-20 meter bands.

The FT-DX-9000 Contest transceiver, custom-configurable version, provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, two pairs of analog meters, LCD window, variable RF filter (VRF), three Key jacks and two headphone jacks. DMU, TFT, RXU (dual-receive) and u-Tune are optionals.

The FT-DX-9000MP transceiver version provide 400 Watts of power output and comes with: external 50V / 24A switching power supply and speaker, two pairs of analog meters, LCD window, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability. TFT and u-Tune are optionals.

FT-DX9000D front-end :


Yaesu FT-DX9000D front-end block diagram

FT-DX9000D rear panel :


Yaesu FT-DX9000D rear panel and connections

FT-DX9000D price

We have collected for your convenience the Yaesu FTDX9000 sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price Date Condition
USD 10155.00
(8622EUR)
2021-aug Brand-new

FT-DX9000D review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.

Newsletter RadioMasterList.com

Thank you

Good, old times:
Grundig, the flagship receiver
Satellit 3400
FM, LW, MW, 1.6-30 MHz

Recent YAESU direct-sampling transceiver
FT-710
HF/50/70 MHz, 102dB IMDR, 100 Watt

Aeronautical HF Frequency List 2023
New eBook
All the frequencies, all the Countries

USA Ham Repeaters
Pennsylvania
And Maryland, New York, Virginia ...

Most view radios
RadioMasterList.com

Most view radios
RadioMasterList.com

Top