UV-5X3 | Baofeng

Baofeng » UV-5X3

Triband (VHF / UHF) and dual watch analog portable two-way radio. It's a cost-effective handheld that includes a receive band of 65-108 MHz for the regular FM broadcast and providing 5 watt max output power. Ideated in P.R. of China, year of introduction 2016.

Reference market : ham-radio / PMR

General :
Frequency coverage RX 65.0000 ~ 108.0000 MHz [1]
130.0000 ~ 179.9900 MHz
222.0000 ~ 225.9900 MHz
400.0000 ~ 520.9900 MHz
TX 130.0000 ~ 179.9900 MHz
222.0000 ~ 225.9900 MHz
400.0000 ~ 520.9900 MHz
Modulation mode FM
Tuning step 2.5 / 5 / 6.25 / 10 / 12.5 / 20 / 25 / 50 KHz
Receiver :
Sensitivity FM 0.2 uV (12dB SINAD)
Selectivity FM > 60dB (on adjacent channel)
Image and spurious rejection > 60 dB
Frequency stability ± 2.5 ppm
Transmitter :
Output power VHF 1 / 5 W (130~179 MHz)
1 / 4 W (222~225 MHz)
UHF 1 / 4 W
Spurious emission Adjacent channel < -60 dB
Maximum FM deviation ± 5.0 KHz (wide)
± 2.5 KHz (narrow)
Features :
Memory 128 regular memories
Display 1 KHz frequency resolution
Segment-bar signal meter
Selective calling CTCSS / DCS
DTMF ANI (Automatic Number Identification)
1000 / 1450 / 1750 / 2100 Hz tone
Antenna SMA 50Ω connector
Power supply 7.4 V battery (Li-Ion, 1500 mAh)
8.0 VDC external
Power consumption 380 mA RX, typ
75 mA RX, squelch on
1.4 A TX, max power
Audio power 1 W
Audio output Jack 2.5 mm headphone
Connections Jack 3.5 mm (microphone)
Mechanical and environmental data :
Operating temperature from -20°C to +60°C
Dimensions 58 (W) x 110 (H) x 32 (D) mm projections not included
Weight 214 g (with battery)

[1] Commercial radio reception in Wide-FM mode

Description :

The Baofeng BTECH UV-5X3 is an affordable tribander able to transmit on narrow and wide channels (12.5 and 25 kHz) in FM mode. It's ideal for use on 145 / 222 / 430 MHz amateur bands and on full VHF and UHF commercial, public safety, business PMR frequencies. Features: Dual watch to monitor channels (semi duplex mode) with different frequencies even on different bands, the radio scan between two channels at a fixed interval and look to the first incoming signal. FM broadcast band, while still monitoring your radio stations in the background any incoming call will be given priority switching on VHF/UHF channel. Squelch adjustable in 10 levels. CTCSS, DCS, tone-burst selective calling methods. Send / decoding ANI (DTMF) tone. Two RF power levels (High / low). VOX (Voice-activated transmission) function. Roger-beep. Range of 0~69.99 MHz in 10 KHz steps for frequency offset when communicating via a repeater, also input/output frequency reverse. Transmitter time-out timer (TOT), busy channel lock-out (BCLO) and channel receive only (TXoff) functions. Tri-color LCD display. Switchable power saving function, with ratio of sleep cycles to awake cycles of 1:1 / 2:1 / 3:1 or 4:1. Flashlight. Optional PC03 FTDI USB programming cable.


The UV-5X3 Baofeng-BTECH comes shipped with these items

Other features: Includes both the V-85 dual band antenna, for 130~180 and 400~521 MHz, and an antenna specifically tuned to VHF 222 band. The accessory jack on the UV-5X3 Baofeng / UV-5X3 BTECH is a Kenwood compatible "2-pin" standard for speaker/mic and PTT. Simultaneous display for those that want to have full information at their fingertips, you can configure the displays to allow both the channel name and frequency. Memory, tone and frequency scanning with channel skip. Easily add or remove a channel from the scanning list. On VFO mode you can easily enter in the range and frequency steps that you want to scan. DTMF commands, by remotely sending specific audio tones you can both disable TX, disables all functions, or turn on the microphone in other programmed UV-5X3.

Review :

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.

RadioMasterList.com

Copyright. All rights reserved.

Statistiche