FDM-DUOr

Specifications    Prices

Stand-alone and PC controlled direct sampling SDR receiver. Frequency coverage 0.009-52 MHz all-mode. It is part of the FDM-DUO amateur transceiver series. Ideated in Italy, year of introduction 2014.

Reference market : amateur-radio

FDM-DUOr specifications

General
Frequency coverage
0.0090 ~ 52.0000 MHz
Mode [1]
CW / RTTY / LSB / USB / AM / AM-S / FM / WFM / DRM
Tuning step
1 Hz min
Receiver
Sensitivity
CW0.18 uV (14 MHz, 10dB S+N/N)
MDS (Minimum Detectable Signal)
-132 dBm
Selectivity
user-defined
ADC (Analog to Digital Conversion)
Sample rate122.88 Msps
Resolution16 Bit
DDC bandwidth192 / 384 / 6144 Ksps [2]
RF attenuator
12 dB [3]
Blocking
115 dB (2 KHz spaced signals, 10 MHz)
IP3 (3rd order intercept point)
+23 dBm (14 MHz) [3]
Features
Memory
Unlimited memory channels [4]
Antenna
SO239 50Ω
Power supply
13.8 VDC external
Connections
USB2.0
SMA (10 MHz reference input)

  1. For RTTY / AM-S / WFM / DRM modes a PC is request.
  2. For sampling over 192 Ksps a PC is request.
  3. Preliminary informations.
  4. Connected to a PC.
Aeronautical Radio List UK - N. IRELAND 2024
Download Now the eBook, with All the Frequencies 108-137 MHz

Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME

FDM-DUOr description :

Elad FDM-DUOr is an SDR equipped with direct sampling architecture and the peculiarity of a dual user interface. The receiver has a front panel with the main commands that allow you to set a series of control functions. A good size knob is dedicated to the tuning while two other rotary controls and six buttons allow you to intervene on filters, mode, volume, etc. An LCD display makes the operating conditions readable as well as showing the signal strength with a segmented S-meter. From this point of view, this ELAD adds a new dimension to the SDR of this type, allowing them to be used as stand-alone or autonomously from a computer. The combination with a PC implements the second option available to the user, in this case the FDM-SW1 software expands the processing capacity by increasing both the bandwidth of the sampled radio spectrum and the demodulable modes as well as allowing the spectrum analysis and other ancillary functions.

Elad FDM-DUOr block diagram
Elad FDM-DUOr block diagram

The heart of the electronics is the 16-bit analog-to-digital converter operating at at 122 Msps, so the whole tuning range is covered without frequency conversion. For the stand-alone operation the high-performance Spartan-6 family FPGA (Field Programmable Gate Array) based downconverter in conjunction with the STM32F4 processor is responsible for extracting a 192 Ksps channel and demodulating the main modes, ensuring also the selectivity between a predefined filter bank. For the PC side, instead, the USB2.0 connection ensures a wider range of numerical processing thanks to the possibility of dealing with a more consistent flow of data, adequately supported now by an articulated graphic interface rich in settings. Depending on the use, autonomous or combined with a computer, the receiver provides these features:

Stand-alone
ModesCW, SSB, AM, FM
Sample rate192 Ksps
FiltersPredefined band filter, noise blanker
Adaptive functionsNoise reducer (NR)
Aux functionsAnalog I/Q channel output
Connected to PC
ModesCW, RTTY, SSB, AM, AM-S, FM, WFM (Stereo and RDS), DRM
Sample rate192 ~ 6144 Ksps
FiltersContinuous variable band filter, noise blanker, double IF notch filters
Adaptive functionsNoise reducer (NR), auto notcher
Aux functionsSpectrum & waterfall, recording and playback of IF and audio data stream

An interesting utility of the FDM-DUOr is the input for a 10 MHz clock source to synchronize the internal master oscillator, a TCXO stabilized in temperature, making the receiver extremely accurate in determining the frequency tuning to the advantage of effective decoding for the low speed modes used in DX QSO between amateur radio operators. It should be noted that the device is in fact the receiver-only version of the FDM-DUO model, a 5 Watt QRP transceiver. For the receiving part the internal circuit, and therefore some performances that depend on it, is similar to the one implemented in the FDM-S2 from which it stands out, however, for the operating frequency range and the use philosophy.

FDM-DUOr price

We have collected for your convenience the Elad FDM-DUOr sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price Date Condition
EUR 899.00 2021-oct Brand-new
EUR 899.00 2018-nov Brand-new
EUR 845.00 2018-nov Brand-new

FDM-DUOr review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.

Newsletter RadioMasterList.com

Thank you

Good, old times:
Grundig, the flagship receiver
Satellit 3400
FM, LW, MW, 1.6-30 MHz

Recent YAESU direct-sampling transceiver
FT-710
HF/50/70 MHz, 102dB IMDR, 100 Watt

Aeronautical HF Frequency List 2023
New eBook
All the frequencies, all the Countries

Most view radios
RadioMasterList.com

Most view radios
RadioMasterList.com

Top